interaction
Position
PhD-student
Irène Curie Fellowship
No
Department(s)
Electrical Engineering
FTE
1,0
Date off
15/02/2024
Reference number
V36.7172
Job descriptionBackground
Trucks play a major part in the delivery of goods, but are also responsible for a lot of air pollution. Cities are therefore more and more banning heavy transport from city centres and even complete built-up regions are increasingly converted to emission-free zones. This change, together with economic benefits, will see much road transport transitioning from fossil-fuel powered to electrified trucks. As a direct consequence, a large demand in (high-power) fast chargers for trucks is foreseen, and in conjunction a large load on the electricity grid. The Netherlands is facing net congestion problems at the moment already due to a rapid growth of electricity use and PV generation, and it is expected that these problems will only intensify and occur in more and more countries in the future.
Charging infrastructure for electric trucks will be concentrated on industrial estates where many distribution centres can be found. Especially in those locations, net congestion problems are expected to occur. The newly approved Nationaal Groeifonds Charging Energy Hubs project is aimed at combatting these problems through the use of smart energy solutions. Seamless integration of charging infrastructure, (renewable) energy generation, energy storage and scheduling demand of local energy consumers, will allow charging hubs to offer flexibility during peak demand and in case of grid balancing problems.
Within this project, the Power Electronics lab at the Eindhoven University of Technology is looking for two talented PhD-candidates.
Position 1: Advanced control of medium-voltage-connected multilevel converters Fast charging at high-power levels requires a connection to a medium-voltage grid, in order to alleviate the load on the low voltage network. Multilevel converters can be used to couple the low voltage DC output to a medium voltage AC network. These converters are complex to control, as they typically consist of many series connected power converter modules. The resulting MIMO control problem is nonlinear and offers many degrees of freedom that can used to optimise the charger performance. In this position you will have the opportunity to explore creative solutions for modelling, modulation and (nonlinear and/or distributed) control of (amongst other converter types) the modular multilevel converter and stacked H-bridge converter. Naturally, experimental verification of your ideas on a laboratory setup will be part of the work.
Position 2: Modelling, interaction and control of grid-connected switched- mode power converters When connecting more and more power converters to a grid, the influence that they have on connected loads and generation will increase. Voltage level and power quality problems surface already under large quantities of photovoltaic generation, but coupling many high-power chargers to a grid is expected to have more consequences; on stability, power quality, harmonic injection, et cetera. On the other hand, the connected converters will also provide opportunities to counter many of these problems, given a good understanding of the problems, and making use of topological and changes in control. In this position you will use all your knowledge and creativity on modelling these interconnected converters and their interaction with the grid, analysing their influence, and investigating control methods that improve the power quality. Your proposed solutions will be implemented on prototypes in our laboratory. This will require experience with building and testing switched mode power converters.
Additionally, for both positions, presenting your findings and ideas to the scientific community is an essential part of your work, for which there are extensive travel possibilities.
Job requirementsWe are looking for a talented and enthusiastic colleague with a MSc-degree in electrical engineering, with a strong affinity with and knowledge of power electronics, state-of-the-art digital control, and mathematics. The candidate should have:
A meaningful job in a dynamic and ambitious university, in an interdisciplinary setting and within an international network. You will work on a beautiful, green campus within walking distance of the central train station. In addition, we offer you:
About us
Eindhoven University of Technology is an internationally top-ranking university in the Netherlands that combines scientific curiosity with a hands- on attitude. Our spirit of collaboration translates into an open culture and a top-five position in collaborating with advanced industries. Fundamental knowledge enables us to design solutions for the highly complex problems of today and tomorrow.
As a PhD student, you will be working in the Electromechanics and Power Electronics (EPE) group in the Electrical Engineering department (https: // www. tue.nl/epe). This group is one of the nine research groups of the Department of Electrical Engineering at TU/e and is the main centre for research in electromechanical power conversion and power electronics in the Netherlands.
Curious to hear more about what it's like as a PhD candidate at TU/e? Please view the video.
Information
Do you recognize yourself in this profile and would you like to know more? Please contact the hiring manager dr. ir. Maurice Roes, m.g.l.roes(at)tue.nl.
Visit our website for more information about the application process or the conditions of employment. You can also contact HR Services, email hrservices.fluxattue.nl.
Are you inspired and would like to know more about working at TU/e? Please visit our career page.
Application
If interested, please use the 'apply now'-button at the top of this page. You should upload the following: a detailed curriculum vitae, a complete list of the marks obtained during your university career, a letter of motivation, clearly stating which of the two positions you are applying for , and a portfolio with relevant work. Your application should include:
Please keep in mind that you can upload only 5 documents of up to 2 MB each. If necessary please combine files.